The thread on the bottom of the fabric does not properly fit. What can be done with the sewing machine? The sewing machine is an Elna Opal.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
make sure that the sewing machine top thread is correctly threaded from the thread spool on top of the machine down through the tension disks, down and up through the thread take-up mechanism and through the needle. Also make sure the bobbin compartment is working properly by opening it and removing the bobbin casing. If the bottom stitches are loose, turn the screw closest to the bobbin case centre an eighth turn to the right with a tiny screwdriver. However, if the bottom stitches are too tight, do the same thing but to the left.
Also this link provides further instructions www.fixya.com/
There is a dial on the machine that adjusts the thread. There is also a screw in the bobbin area that is used as well to adjust the bottom tension.
Please - where is this screw. Can you illustrate and the also dial.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
