Does anyone know if you can paint latex paint over enamel? Or is it you can paint enamel over latex? I cannot remember. One way you aren't suppose because it doesn't stay on good, because there's no bonding.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Since enamel is a very smooth paint you have to rough it up first by sanding it.
I run the batchmaking department for a large paint manufacture. The rule of thumb is that, given proper surface preparation, for exterior use you can apply quality latex paints over oil-based, but not the reverse. However, if you have many layers of oil based paint, stick to using oil on oil.
From personal experience I know that latex does not bond well to enamel paint. You can sand the enamel-based surface lightly, or prime it with something like Benjamin Moore's "Fresh Start," and that will cedrtainly help, but the surface will still be prone to chipping, especially if it's in a high traffic area (like kitchen cupboard doors, for example).
Give the surface a light sand, make sure to wear mask so not to inhale the dust. Clean the surface from dust and dirt, coat it with a good quality primer, then paint away.
I would call on the phone your local paint store such as Sherwin Williams or other paint store listed in the yellow pages. I have used oil based paints in and on the exterior but some paint companies are doing away with oil based paints and are selling water based only.
I already first coated my storage cabinet that is built in, so part of it is concrete. My first coat is enamel for the wood part and latex on the concrete.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
