My ice maker, model 106.9738612, will not fill with water. I have replaced both ice maker and valve, but it still will not fill up with water. I used a jumper on the ice maker and the water filled up. There is good water pressure and the rest of the ice maker works.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
try replacing the thing that is sapossed to hold the water you can get them at a store
I have same problem. what thing that holds the water ? I replace the entire ice maker and valve but still no water
Kenmore ref.ice maker is not getting water I have check
Change the water filter.
EASY FIX!!!!! And you don't even need to cut power. For bottom ice maker if the reset works but no water, just do this. Remove the 2 screws holding ice make in bottom pull out. You will need to remove the small bottom top draw Unplug 2 wire clips. Now on back of fridge unscrew the 2 screws holding the small black water line cover going to bottom ice maker. Then remove the internal 2 screws holding valve. No need to unscrew the water line. Slowly slide out the insulated water line.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
