I have a Kenmore sewing machine model 835.16221. The first 12-15 stitches on the zigzag setting are perfect and then it switches to a straight stitch. Any ideas on how to correct this?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
it sounds like you are saying that you set the machine to stitch zig zag and in the middle of sewing it switches over to straight stitch. This is normally an issue with the machine setting or the mother board of the machine moving. This is an older machine and your setting are done with the buttons on the machine. You will need to open the machine up and give it a good cleaning inside. That means removing the top cover of the machine. Drop 1 drop of oil in the control location to make sure it is not moving on you. You may need to order some replacement parts if one is worn on the inside.
Sounds like something is worn but not completely and will start okay but slips after a few stitches. Either that or could be something (old thread or debris/gunk) that gets jammed after a few stitches.
Google Sears Service Center with your zip code and give them a call. usually they know right off what is causing the problem as they usually know Kenmore products better than anyone.
They may tell you to take it in but just say no and ask what you can do yourself. They should also be able to direct you to a free manual.
You can ask for help on this link but recheck your model number as this site is not finding that number (maybe 385?).
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!