I used masking tape to frame up a window and I left it there too long. The tape has now dried up and is hard to remove. Any help would be greatly appreciated.
By Frank M.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
If it is on the glass, carefully use a razor scraper. Quick and easy.
Soften adhesive with cheap mineral spirits and scrape with razor blade. Easy as A-B-C.
Rub some Skin-so-soft or Goo-gone or WD-40 or Soapy water or De-Sol-it on the back side.
Ditto with carefully using a razor blade. A single edged blade would be the safest. You can purchase them at any hardware, home improvement and even beauty supply stores.
Try heating it up with a blow dryer if all else fails.
Eureka
Problem solved. Soak with white spirit and leave for 15 min
With a cheap plastic scraper tease the tape end up.
Now the important bit. As SLOWLY as possible peel the tape off.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
