Removing Excess Wood Stain

lalala...
Gold Post Medal for All Time! 899 Posts

Removing Excess Wood Stain I recently stained my son's wood play kitchen, but didn't remember to wipe off the excess stain. The surface never fully dried and remained sticky, so I needed to remove the stain and start over. I tried numerous things to remove the stain including Citrustrip and lacquer thinner. Finally I tried Paint Erase Stripper Gel, which worked really well!

Supplies:

Paint Erase Stripper Gel
plastic putty knife
gloves
nylon paint brush or foam brush
scrub brush
water

Steps:

Cover your work surface with plastic or cardboard. Using a brush, apply the stripper gel to the surface of the wood. The layer should be applied to a thickness similar to icing on a cake. Cover the entire area that you want to strip.

You should start to see the surface change color after about 15 minutes. It is ready to start scrapping after 1 hour.

Using the putty knife, carefully begin scrapping off the gel. It should roll up as you scrap, taking stain with it.

Apply and scrap off the gel (following the above steps) as many times necessary to remove the stain. I repeated it 3 times.

Use a brush and water to remove any excess gel. Allow the wood to dry thoroughly before refinishing it. You may need to lightly sand the surface too.

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

Comment