I have AX-24 electronic Brother Typewriter. When power button is turned on, the Line 1 light just blinks and nothing works. It is cleaned, the daisy wheel, ink cassette and correct tape are all functioning as they should and have been reinstalled. I have done the resets of Code + Line out + Power on and pressed pretty much every key in combination. I have read the manual completely.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
It looks like it wasn't just your AX24 typewriter that had this problem. I found on the site www.brother-usa.com/
This is a very unusual problem, which may have several different causes. Check for the more common causes first.
1. Turn off the machine and unplug it from the wall outlet.
2. Open the top cover and look to see if any foreign objects have fallen into the machine.
3. Remove the ribbon from the carrier and verify that it is not exhausted.
Brother Industries, Ltd. is a Japanese multinational electronics and electrical equipment company headquartered in Nagoya, Japan from 1908.
This is an operating company. Therefore, I advise you to contact Brother's service center. You can find your nearest service center here www.brother-usa.com/
One of the suggestions in this article is to make sure it is level. itstillworks.com/
Your typewriter will need servicing. Go to www.brother-usa.com/
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!