Is a New Home Memory Craft 7500 worth getting repaired if it says communication error?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Have you tried resetting it? Your manual would have how to reset. Also make sure it is not clogged with debris. This will hinder the machine if there is anything built up inside , therefore throwing a error code. Clean out , reset, and try again before giving in! Here is a link to others with trouble shooting - sewing.patternreview.com/
Communication error is not that hard to fix on most sewing machines. The machine could have taken a power surge or when plugged in was not connected correctly. I would start off by resetting the sewing machine. Your user manual has these instructions in the back of the book under troubleshooting. Follow the directions and reset the memory card in the machine.
I believe there are several options that you could explore so I would not toss this machine too quickly.
There are sewing forums that can help you find the right answer to this question so please check them out. You may have to join but just an email is all you need.
sewing.patternreview.com/
You can also ask Janome for help but not sure they will help.
here is a link for a free manual for anyone searching for this information.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!