The thread take up lever is jammed with thread. How do I take the top cover off to expose this part?
By SM
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
First of all unplug the machine from the electrical current - check your user guide manual to see if there are recommendations about static electricity build-up to avoid a nasty shock!
Then look at the sides and top of the head (sitting at the machine, the part of the machine the needle and bobbin are on is called the head) for little holes. Look down into those holes to see what size screwdriver you need.
Take photos of those screws in place, and continue taking photos as you remove the screws so that you can replace them correctly once you've cleared the jam.
Place the screws into a saucer or muffin tin as you remove them so that they aren't lost.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
