The top thread on my machine will not catch. I was initially having an issue with the bobbin thread not catching on the hook. Now, the top thread will not stitch correctly. When I change the type of stitch I want to do (i.e., zig zag) the needle moves side to side as if doing the zig zag, but does not make the stitch.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Here's a free download of your user guide from the Singer website:
www.singerco.com/
Although I do quite a bit of repair and refurb on Singers, I have no experience with the computerised models - go through the manual and be sure you're using the correct settings (there can be several for each stitch wanted). If none of that helps, it's time for a visit to the Singer factory trained repair tech.
Hi. I have just had the same prob with my machine and I found out via the repair man that the timing belt had slipped and this causes the needle not to reach the bobben. Try lowering the needle a little in its holder and see if this allows the machine to stich. Hope this helps. Good luck
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
