This project makes a handy addition to the kitchen if you are following a recipe from the internet while cooking or it can be used anytime you need to prop up the iPad while you are doing something.
Total Time: 1 hour
Yield: 1
Supplies:
- 1 piece of wood measuring 8 1/2 x 22 inches
- 1 table saw
- 1 scroll saw
Steps:
- First, cut the wood into two pieces: 14 inch (base) and 8 inch (support) using table saw.
- Measure and cut the notch, using the scroll saw, in the base 2 1/2 inches from bottom edge using the thickness of the board as a guide. This example is 1/2 inch thick but any thickness will do.
- Measure and cut the notch in the (support) 1 3/4 inches from the top edge using scroll saw, so that the (support) board can interlock with the bottom of the (base) board.
- Push the support into the base board and make any necessary adjustments such as cutting notch deeper if necessary.
Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!
wordswork
Bronze Feedback Medal for All Time! 170 Feedbacks September 1, 20230 found this helpful
I've recently learned that my local (big box) hardware store will cut wood!
Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!
