Small Kitchen Appliance Repair (Questions)

Unanswered Questions

These questions don't have answers yet. Can you help them out? ThriftyFun is powered by your wisdom.

Sealing Sensor Light Does Not Work?Is there a way to replace the red, yellow, and blue sensor/seal light? I can manually seal bags but only the red seal light comes on when I press "Seal". There are no lights to indicate if the air is being removed.

Answer

Bread Machine Pan Keeps Popping Out?My bread pan keeps popping out of the cradle during the kneading time. Is there any way to fix this?

Answer

V3820 Food Saver Light?I can not get the tray light to go out. I cleaned both the upper and lower tray. The light still will not go out.

Answer

Bread Machine Will Not Knead?I have a new Hitachi HB-B101 bread machine that has been sitting for 2 years. I tried to use it today, but it will not knead.

Answer

Teflon Coating Coming Off Foreman Grill?The black paint came off of part of the grill plate. It is still working fine. What difference does it make?

Answer

Foreman Grill Will Not Heat?I have a George Foreman grill, the unit will not heat up. Plug in power is good and 110 V getting to the unit.

Answer

More Unanswered

Browse Questions

Chefmate Error Code E:03?Needed a second bread machine. Bought a used Chefmate HB-215. It keeps showing error code E:03 every time you try to set anything that reading comes up. Anyone familiar with what it means?

6 Answers Answer

Sunbeam Breadmaker Is Not Kneading?My Sunbeam breadmaker is not kneading, what do I do?

5 Answers Answer

Welbilt Bread Machine Not Baking?I'm not sure what's going on with my bread machine. In the past when the bread didn't rise enough, I assumed I was doing something wrong. This time, it not only didn't rise much, but the bread is not cooked enough. The paddle also baked into the bread. All the ingredients were fresh, though I did change the order I added them. Could that have caused the problem, or is there something wrong with the machine?

5 Answers Answer

Looking for a Bread Maker Motor?I have a KBS 2 lbs bread maker and it has began slowing down and not kneading as it used to. I'd like to replace the motor to see if that resolves the issue. It does function once it breaks through the dough, but will stall out often and appears to be whining to get past that point.

5 Answers Answer

Troubleshooting a Black and Decker Breadmaker?Used my Black and Decker All-in-one Breadmaker B1561 extensively during Covid, but recently the bread rose, then sank in the later stages. The pan paddle seems very stiff and I find the machine paddle stiff also. Could this be the problem?

6 Answers Answer

Repairing a Breville Breadmaker?I have a Breville breadmaker model BR7L.The heating element is defunct. I have been unable to find a site which allows me to purchase a replacement. Can you please advise me of an appropriate site?

3 Answers Answer

Is it Worth Trying to Repair a Bread Machine?I got this old bread machine Regal Pro Breadmaker K6773. It works when I plug it in, but when I try to set a mode or do anything else, I get this E 07 Error, which, according to the manual, is a "possible circuitry defect". Is there any way to find out what exactly is wrong with it or, more importantly, is there any way to fix it?

5 Answers Answer

Repairing a Hitachi Bread Machine?My Hitachi Bread Machine (HB-B301) is over 20 years old. When I attempted to use it, I received an error message (--P): (1) an excessive amount of flour as compared to water. (2) An insufficient amount of water as compared to flour. (3) The seal packing is scratched.. (Ingredients block the lubricant oil between the shaft and metal of the bread pan because of the leakage of ingredients through seal packing.)

4 Answers Answer

Repairing Corningware Coffee Maker?Has anyone found a food safe adhesive to reattach the steel collar that actually works? Thanks!

11 Answers Answer

Replacement Parts for George Foreman?Where can I find a replacement drip tray P/N21678 for a George Foreman Lean-Mean Contact Roasting Machine (GV&)?

4 Answers Answer

Repairing Control Panel of Breadmaker?The control panel buttons on my Cookworks breadmaker do not respond anymore when pressed. How can I repair it? Can it be replaced? The machine itself worked fine.

2 Answers Answer

George Foreman Heating ElementI have a George Foreman 10040 and need a heating element.

3 Answers Answer

Repairing an Oster Bread MakerI have an Oster 5858 bread maker. The shaft that holds the paddle falls out of the bowl base bottom. I have to keep the bowl base with the shaft locked in the breadmaker, then attach the paddle so that I can fill the bowl with liquids and then the dry ingredients. The shaft does sits slightly lower, but still works with the paddle. The bread maker still does a good job of mixing the dough.

5 Answers Answer

Repairing a Zojirushi Bread Maker?I have had a Zojirushi breadmaker, model BB-CEC20 for about 7 years, but only started using it more frequently recently, so it hasn't gotten a whole lot of use. Yesterday, it turned off mid-cycle (after the bread rose) and now I can't get it to turn on again. There's no response pressing any of the buttons on the control panel.

2 Answers Answer

Bread Pan and Paddle for Black and DeckerPaddle is rubbing and squeaking while the bottom apparatus that the paddle fits on is leaking black matter under the pan. It looks like melting rubber.

3 Answers Answer

Rocket Chef Blade Replacement?How do you change blades on the Rocket Chef? Mine seems to be stuck and I can't get it out.

5 Answers Answer

Shafts in Bread Machine Fell Out?The shafts in my Black & Decker bread maker fell out and all my liquids spilled out. Is there something to keep them attached to the bread pan?

2 Answers Answer

Parts for a Welbuilt Bread Machine?I have a Welbuilt bread maker Model ABM3300. I need to replace all of the moving parts at the bottom of the bread pan, or perhaps an intact functioning bread pan.

3 Answers Answer

Sunbeam Bread Machine Won't Stop Running?I have a Sunbeam bread machine, model 5891 that as soon as you plug it in it starts running. I have tried to reset it by holding in on the power button, but it won't stop unless I unplug it.

5 Answers Answer

Repairing a Morphy Richards 48268 Bread MakerMy Morphy Richards 48268 bread maker was working perfectly. Then this morning there was a rattling sound from the motor area and the paddle and the shaft were not turning.

5 Answers Answer

Welbilt Bread Machine Error Codes?As I tried to start my Welbilt bread machine after adding all the ingredients I got an error that said HI. I suspect it's related to the temperature of the water which had gotten a little more than warm (boiling). I can't find this code. It's working now so maybe it cooled down.

4 Answers Answer

Bread Maker Paddle Remains Stuck in Finished Bread?I love my breadmaker and the bread releases easily once baked. No sticking, but the paddle remains in the bread and I have to dig it out. Any suggestions?

3 Answers Answer

Sanyo Bread Maker Doesn't Start?At this time of COVID, I decided to get out my Sanyo bread maker. It had not been used for several years. I put all the ingredients in pan and clicked it in place. The numbers lit up once it was plugged in. I pressed my bread number and start, but nothing happens. The time shows in the lighted window, but no action.

1 Answer Answer

Breadman TR 444 Stops Mid Process?My Breadman Tr444 works most of the time OK. But it seems to be shutting down mid processing more often. It goes thru kneading and then just stops. The panel just displays as if it was preselection. There is no heat error message.

6 Answers Answer

Wolfgang Puck Bread Machine Trips GFI Switch?My Wolfgang Puck bread maker keeps tripping the GFI switch when it goes into the baking mode. Is this an easy fix?

3 Answers Answer

Repairing an Oster Bread Maker?I have an Oster bread machine that is stuck in one mode. How can I fix it?

6 Answers Answer

Mister Coffee Bread Machine Not Working?I have a Mr. Coffee BMR200 bread machine. The initial knead cycle works then it just starts spinning and spinning really fast and won't stop. How can I fix this?

2 Answers Answer

Repairing a Bread Machine?I have a Zojirushi bbccx20 bread machine. The pan seems to have an issue. One paddle is very hard to turn, the other moves smoothly. Is it possible to fix?

4 Answers Answer

Bread Maker Won't Knead the Dough?Have a Sunbeam 5891 breadmaker that suddenly refuses to knead the dough. The machine runs, but the paddle won't turn. Does it need a new basket and paddle or a good swift chunk into the trash? I can't find a bread machine anywhere on line and my handmade bread sucks rocks.

3 Answers Answer

Electric Ice Cream Maker Not Working?Why doesn't my electric ice cream maker turn at all? I hear the motor running. What am I doing wrong? Does it take a minute to warm up?

3 Answers Answer

Panasonic Automatic Bread Maker Won't Turn On?We have a Panasonic bread maker that won't switch on. I have replaced the fuse, but it still doesn't work. I only used it 2 days ago when it was perfectly fine! Any ideas on what the problem might be? It is only 18 months old.

6 Answers Answer

My Bread Maker Isn't Mixing Completely?I have been using my bread maker for years now and it is pretty old. I pulled out my bread maker after a few months and I decided to make banana bread. I saw that it was mixing and all so I thought it was fine. After the baking cycle when I went to pull it out I noticed that the top half didn't even mix and only the bottom mixed and baked.

6 Answers Answer

Breville Br1 Breadmaster Bread Machine Won't Heat Up?I have a Breville BR1 fan assisted bread maker. Recently I found that it doesn't heat up anymore. The dough is made perfectly. How do I open and repair it? Where do I buy the heating element?

3 Answers Answer

Display on Oster Bread Machine Not Working?My Oster bread machine has been working fine, but now the display does not show. It has power. It beeps, it kneads, and even bakes (per experiment), but I have no idea what cycle it's really on, which makes things a little tricky. Any idea if the display can be reset?

1 Answer Answer

Repairing a Bread Machine -shaft showing missing part location

Repairing a Bread Machine?My bread maker, a Breville BBM100, has destroyed part of its pan seal kit - a tiny washer that would fit on the end of my pinky finger. No spares are available. I've searched and now found there were never spares for this model, which they still make. Do you have any ideas about something I could use to improvise a repair? I've tried local suppliers of nut and bolts, etc. to no avail.

3 Answers Answer

Can't Open the Drip Tray on Food Saver?I have a Food Saver V4400 series vacuum sealer. I need an unusual repair. The sealer works great and it still seals very well. The problem is, I cannot open the pull out drip tray, it's closed tight and I cannot get it open. It is no longer under warranty so I cannot send it back to FoodSaver.

5 Answers Answer

Repairing a Russell Hobbs Bread Maker?Some kind person has donated a broken bread machine to a charity store instead of getting rid of it. My partner and I bought it and our excitement to bake has soured somewhat.

2 Answers Answer

Repairing a Galloping Gourmet Convention Oven?Is there a repair diagram for the motor and fan for the Galloping Gourmet convection oven? I have taken it apart to fix the broken bolt mounts, and I am having a hard time getting it back together.

2 Answers Answer

Replacing Timing Belt on a Bread Machine?I have a Wolfgang Puck bread machine that needs a new timing belt. How to I go about replacing it? Model BBME025

3 Answers Answer

Bread Pan Stuck in Bread Maker?I recently purchased a second hand Kambrook bread maker from a friend. The bread pan is stuck inside the machine and cannot be removed, even with force. It looks to be in relatively good, clean condition. I am not sure how long since it has been used. Is this a common problem and what is the best way to remove it?

6 Answers Answer

Paddles Won't Turn on Bread Machine?The paddles won't turn right away on setting #3, unless I jiggle or open and close the cover. Then if lucky the paddles seem to turn fine. Is there a switch associated with the door, or does this have to do with positioning of the paddles?

2 Answers Answer

George Foreman Grill Won't Turn On?Our large George Foreman doesn't work. I plug it and nothing happens. It won't turn on.

3 Answers Answer

Bread Machine Paddle Does Not Turn?I have an old bread machine, Hitachi HB-B101. The machine seems to be working, but power does not transfer to the paddle and it does not knead dough. Does this mean the bottom of the pan is worn out and the parts are not clicking? I am hoping replacing a pan and paddle would fix the issue. But before purchasing anything, if possible, I would like to pin point the issue.

4 Answers Answer

SKG Bread Machine Does Not Power Up?My SKG machine that I just bought from a liquidator store does not power up. When I plug it in, nothing happens. The panel does not lit up. There is no on/off switch.

7 Answers Answer

Wolfgang Puck Bread Maker Not Kneading the Dough?My Wolfgang Puck breadmaker stopped kneading. As with other makes could this be a timing belt issue? The motor still runs and makes all the appropriate noises.

1 Answer Answer

Bread Machine Shorts Out When Starting Baking Cycle?My bread maker makes great dough and I gather the element works as it is lightly heated during the mixing and curing stage. The minute it starts to try to bake the bread it trips out. Any suggestions would be appreciated thank you!

2 Answers Answer

Food Saver Not Removing Air Before Sealing?My food saver is not taking the air out of the bag, but it still will seal.

1 Answer Answer

Repairing a Black and Decker Breadmaker?I have a Black & Decker All-in-One Horizontal Deluxe breadmaker. I'm sure the belt is off. I tried to open the bottom and have removed the 6 screws, but it is resisting and I do not wish to break it trying to get it open.

2 Answers Answer

Repairing a Breville Bread Maker?My Breville BR Nine Rapid Bake bread maker won't work on the cycle for whole wheat bread. It works OK on other cycles.

3 Answers Answer

Oster Bread Maker Will Not Turn On?I have had a an Oster bread maker for a few years and it has worked well. The other day I plugged it in and nothing happened. There was no noise or display lights, it was just dead. Is there a loose connection, or is the plug wire bad? What do I look for or how do I fix it?

1 Answer Answer

Error Code HE:02 on Nakamura NPA-100l Bread Maker?I have Nakamura NPA-100l bread maker and last night when I tried to make a loaf of bread while it was mixing the ingredients it started beeping and I saw the error code HE:02 on the display. Can someone tell me what it means? Also, none of the buttons work.

1 Answer Answer

West Bend 4065 Bread Maker Locking Up and Not Kneading?My bread maker, a West Bend 4065, is locking up and not kneading. The motor is trying, but the paddle won't turn. This has happened before. The belt is not broken. Do the gears need oil/grease? I have had this unit many years, but it only gets used 1-4 times a year. I would like to use it more.

2 Answers Answer

Repairing a West Bend Bread Maker 41065?My West Bend bread maker #41065 has worked fine for years. But last time I made a loaf the entire bread pan would rotate whenever the machine was kneading the bread. I thought the bread pan itself was wore out and bought a new one. However, that did not solve the problem.

4 Answers Answer

Moulinex Breadmaker Keeps Overheating?I have a Moulinex breadmaker which keeps stopping during the baking cycle. I think due to overheating. Is there any way to fix this?

2 Answers Answer

Using a Toaster That Got Wet on the Bottom?My aunt forgot that she was filling the water pitcher and it overflowed and this time it got under the toaster. I unplugged it and dried it the best that I could. When will it be safe to plug it back in?

3 Answers Answer

Repairing a Hamilton Beach Bread Machine?I have had a Hamilton Beach HomeBaker bread maker for the last 4 years which has worked relatively well. The shaft has fallen out of the bread pan. How would I fix it? I believe there is a seal that needs replacement, but what are the steps and parts that I need to fix the problem?

3 Answers Answer

Sunbeam Bread Maker Won't Start?This is the first time I tried to use my Sunbeam Breakfast bread maker, model 5891. It won't start. Error LLL.

2 Answers Answer

Repairing a George Foreman Grill?The top plastic housing came apart from the grill on my George Foreman.

5 Answers Answer

Black & Decker Bread Machine Error Code?My Black & Decker bread machine B6000c is displaying an error code E01. It is supposed to mean the machine is too hot to run from cooking a previous loaf and needs to cool down before doing another loaf. But I get the message when the machine is cold and hasn't been running. Anyone know how to fix it?

2 Answers Answer

Bread Machine Not Kneading Correctly?I've been using my bread machine for about 2 years. Recently when it is kneading dough, the kneading blades seem to be working very hard. The kneading sound is unusual, the blade does not turn smoothly. It is like my dough is too heavy to knead, but actually is not, as I'm using the same recipe all the time.

5 Answers Answer

Repairing a Biffinett KH1172 Bread Maker - top of machine

Repairing a Biffinett KH1172 Bread Maker?The belt has broken, but after I have unscrewed the bottom screws the bottom will not move. It is stuck. Do you know how I can remove it?

5 Answers Answer

Zojirushi Bread Machine Won't Turn On?I bought a Zojirushi bread machine at a thrift store. I've always wanted to try one of these, but new ones are so expensive. I'm very disappointed that when I plug it in it doesn't even light up and the buttons do nothing. Do these things have breakers or fuses that can be replaced?

3 Answers Answer

Repairing a Sunbeam Breadmaker?I have a Sunbeam breadmaker which makes perfect bread/dough/jam. However in the kneading cycle the bread bin rocks from side to side making a terrible noise, unless you hold it still while the paddle kneads the dough ball. How can I fix it so that the bread bin stays still while the paddle kneads?

2 Answers Answer

George Foreman Grill Keeps Shutting Off?I am having a problem with my George Foreman Grill GRP4842RB. When I try to turn on the grill it automatically shuts off, especially if I put it on sears (500F). Can it be repaired?

5 Answers Answer

Toastmaster Bread Machine Error Codes?My Toastmaster bread machine popped a 0 as an error code. I do not know what it means.

2 Answers Answer

Non-stick Finish Came Off George Foreman Grill?My husband has scrubbed the grill and taken the non stick finish off. Is there anything I can do?

6 Answers Answer

Oster Bread Maker Pan Won't Stay in Place?I bought an Oster 5834 bread machine at a garage sale. It had never been used the kneading blade was still wrapped in plastic on the cord. I tried making bread and during the kneading process the bread pan gets knocked out of place and the blade stops spinning.

2 Answers Answer

Fixing a Leaking Keurig K70 Coffee Maker?I have a Keurig K70 used coffee maker that is leaking from the bottom of the reservoir. I usually use it for making hot water for tea. It drips a few drops of hot water, then stops. After about 20 minutes, all the water leaks out of the reservoir.

3 Answers Answer

Repairing an Oster 4811 Bread Maker?This is a thrift store purchase. It worked fine for a bit, now it will not power up. There is nothing on the display panel so I cannot set anything. Ideas?

2 Answers Answer

Repairing a George Foreman Evolve Grill System?I have the above George Foreman Evolve grill and I just used it. It is about 2-3 years old. Yesterday I plugged it in, but it would not turn on. The light comes on, but you can not turn the machine on. How do I get the machine on?

2 Answers Answer

Paddles on Bread Machine Not Turning?I just bought a Black & Decker B2300 bread machine. I washed and put in the paddles, recipe ingredients, and followed the directions to set on dough cycle. Well the paddles don't do anything, but the timer is counting down.

10 Answers Answer

Repairing a Westbend Breadmaker?How do I fix my Westbend breadmaker? I turn it on, and there is a clicking sound from the motor, but the paddles don't turn.

2 Answers Answer

Breadman Plus TR777C Won't Turn On?I only use my Breadman Plus Model #TR777C to knead my pizza dough and it doesn't turn on. I used it a couple of weeks ago and it worked fine. When I plug it in, it makes 1 click and then silence. Is there a loose connection inside? Should I junk it or is there a part I need to replace?

3 Answers Answer

Plug on NuWave Oven Hot After Use?Is it normal for the prongs on the plug to be hot when you unplug it after use? I have the manual dial type.

4 Answers Answer

Replacement Temperature Sensor for Foreman Roaster?My George Foreman GV5 roaster stopped working. I learned that changing the temperature sensor may be the answer. Where can I get a sensor for this roaster?

4 Answers Answer

Repairing a Sunbeam Bread Machine?I have a Sunbeam bread machine, and recently it sounds different when mixing. After the process there are bits of black rubber falling out of the bottom of the bread machine. What is this? How do I fix it without buying a new machine?

4 Answers Answer

Breadmaker b2300 Paddles Won't Turn?The last time I used the machine everything worked fine, but now the paddles won't turn when the cycle begins. I can turn them by hand; no problem. How can I fix this? My machine is a Black and Decker all in one B2300.

10 Answers Answer

Bread Machine Kneading Blade Keeps Spinning?During baking a basic bread, I noticed that my kneading blade keeps on spinning until 20 minutes before completion of the baking and would not stop for the bread to start it's rising cycle. I switched off the machine and turned it on after some minutes. It still continued spinning. need a fast solution.

3 Answers Answer

Silver Crest Bread Maker Trips Circuit Breaker?I have an unused Silver Crest bread maker IAN 38170, which I picked up in a charity shop. When I turn it on to do the initial heat, it trips my RCD. Does anyone know if there is a reset button or equivalent? I have been told by Lidl, where I have discovered it was originally sold, it is too old for them to repair.

3 Answers Answer

Fixing a Toaster?I accidentally poured water into the toaster. At startup, the machine does not work. Is there a way to fix it?

8 Answers Answer

Panasonic Bread Machine Stops Working Midcycle?I use our Panasonic bread machine to mix and knead the dough. It has only been used on the dough cycle. Twice now it has stopped working before the yeast has been released into the dough. Can it be repaired or should I junk it?

3 Answers Answer

Knead Blade on Westpoint Breadmaker Not Turning?The left hand knead blade does not turn. Is this right? If not, how do I fix it?

2 Answers Answer

Removing the Blade from Welbilt Bread Machine?I just got a used Welbilt bread machine. How do I eject the blade from the machine. The eject button does not eject the blade. Am I not doing something right?

3 Answers Answer

Reshaping a Misshapen Food Processor Bowl?Someone at my home used the heated dry on my dishwasher and the lip of my food processor bowl is now bowed out a bit and the lid will not fit properly for use. Has anyone experienced this? If so, did you attempt to reshape the lip of the bowl? How?

5 Answers Answer

Toastmaster Bread Machine Error Code?I have a Toastmaster Breadbox bread machine and I do have the manual. It shows an error code even after being unplugged for several weeks. The code does not show up in the manual. The code is E (with the top bar not showing):E2.

2 Answers Answer

Sunbeam Bread Machine Not Warming Up?My Sunbeam machine doesn't warm up, so it doesn't bake anymore. I used to make french bread with it numerous times. Does anyone know if this is something repairable or will I need to get a new one?

5 Answers Answer

Repairing a George Foreman Grill?What are the electrical components in the George Foreman GR30 grill?

2 Answers Answer

Repairing a George Foreman Grill?We have a George Foreman grill that has just decided to stop working. I've tried to change the fuse, but am unable to as the plug can't be opened. I've unscrewed the screws, but the plug can't be separated.

3 Answers Answer

Bread Machine Paddle Not Turning?My wife borrowed our daughter's Oster 5838 bread machine. She went to use it tonight and now the beater paddle won't turn. Is there a bearing or 2 in the pan that can be replaced? I see a snap ring on the bottom of the pan, so it looks like it can be taken apart. Are the bearings available?

5 Answers Answer

Black & Decker Bread Machine Not Working?My all in one machine turns on and beeps, but does nothing else. I have tried holding the start button in longer. I also tried pressing button 2x but nothing. No turning sounds either. Any ideas before I pull it apart?

1 Answer Answer

Painting the Hot Plate on a Coffee Pot?Does anyone know if there is a safe paint and way of re-painting the hot plate on a coffee pot? I have refurbished a few coffee pots, but have always turned down perfectly good units because the hot plates looked so bad.

2 Answers Answer

Philips Bread Machine Won't Start Kneading?I have Philips 9040 bread maker.It does not start kneading even it is cool and even after delay timing.

1 Answer Answer

Bread Machine Displaying Error Code EH?It began displaying this after a power shortage. How do I continue to use it?

1 Answer Answer

Repairing the Sprayer on a Swifter WetJet?What happens when a sprayer on a Swifter WetJet does not spray and how do you fix it?

1 Answer Answer

Repairing a Broken Handle on Swiffer Wet...Any suggestions to repair it well? Anyone else have this issue? Duct tape and Popsicle sticks don't fix everything. This seems a common problem when switching from a mop, to push into handle to work on a stubborn spot.It broke during first use within a few moments of use.

4 Answers Answer

George Foreman Grill Not Getting Hot?My George Forman Model #GR2144 won't get hot. What should I do?

2 Answers Answer

Small Kitchen Appliance Repair (Questions)Leaderboard Ask a Question Follow

Unanswered Questions

Browse Questions

Small Kitchen Appliance Repair (Questions)Leaderboard Ask a Question
Follow